PREVENTS RISK OF
Antistatic, nail penetration, toe injuries;
PRIMARY ENVIRONMENTS OF USE
Harsh environments, indoors, environments with risk for outsole penetration, all-year use, warm surfaces, outdoors;
PRIMARY INDUSTRIES OF USE
Metal fabrication;
PRIMARY AREAS OF USE
Welding, mining, sheet-metal work, hot work;
Comfortable high boot with highest level of protection, for hot work with features such as wide last and heat-resistant upper and outsole.
Perfect for welders. KEVLAR thread in the seams which resists 427° C short-term heat exposure (max operating limit) and 204° C longer-term heat exposure (constant operating limit).
Nail protection insert in steel, toecap in aluminium and double impact protection zones in PORON® XRD® help prevent injuries.
It’s very important to choose the right size for your safety footwear. A shoe that is too tight or too loose will not only make your working day uncomfortable, it can also lead to blisters and other injuries, and as a result a risk that you will choose to wear other less protective shoes.
Below is a size guide that converts sizes based on the shoe size systems used in different regions. This table is intended as a starting point only. It is of course always best to try on the shoes before you make your final decision. The rigidity of the protective toe cap, for example, means you ought to allow 5-8mm of extra room for natural movement when walking, so you may need a size bigger than you do for your casual shoes. Don’t forget to count in things like extra warm, thick socks and insoles as well.
|
Jalas Sizing |
36 |
37 |
38 |
39 |
40 |
41 |
42 |
43 |
44 |
45 |
46 |
47 |
|
Millimetres |
242 |
249 |
256 |
262 |
269 |
276 |
282 |
289 |
296 |
302 |
309 |
316 |
|
UK |
3 |
4 |
5 |
6 |
6.5 |
7 |
8 |
9 |
10 |
10.5 |
11 |
12 |
|
US Male |
4 |
5 |
5.5 |
6.5 |
7.5 |
8 |
9 |
9.5 |
10.5 |
11 |
12 |
13 |
|
US Female |
5 |
6 |
6.5 |
7.5 |
8.5 |
9 |
10 |
10.5 |
11.5 |
12 |
13 |
14 |
