Request a Quote

  • 500 characters remaining
  • I allow Aviation Spares & Repairs to contact me via email/phone to discuss this enquiry. If you would like to know more about the way we handle your data, please view our Privacy Policy

Aerokleen CD1

Product Description

Aerokleen CD1 is a high performance, cost effective water dilutable aircraft surface cleaner.

  • Completely biodegradable
  • Extremely effective at low concentrations (5% in water)
  • Low streaking
  • Good rinsability
  • Versatile product. Equally suitable for application by foam, brush or robotic equipment (Nordic Dino)
  • East to re-wet and remove if drying onto aircraft exterior occurs
  • Comprehensive aircraft approvals

Aerokleen CD1 has been specifically developed to meet customer requirements for a high performance, cost effective water dilutable aircraft surface cleaner.

Aerokleen CD1 is formulated from a new class of surfactants which has resulted in a superior product which is biodegradable, non caustic, non flammable and completely safe for use both on painted and unpainted surfaces.

Aerokleen CD1 is also non crazing on acrylic plastics.

Please contact Aviation Spares & Repairs Limited for more information on the Aerokleen CD1. We are here to help with all your GSE requirements.

  • Fuselage Cleaning – Medium Soiling:

    Painted and non-painted alloy surfaces may be effectively cleaned using Aerokleen CD1 at a concentration of 5-10% in water, the dilution factor being dependent on the area being cleaned.
    Aerokleen CD1 may be applied by brush, spray or by foam applicator. Application should be commenced at the lowest position working in an upward direction in order to minimise any potential for streak formation. Adequate dwell time should be allowed to ensure complete wetting of the surface which should then be agitated with a brush and subsequently well rinsed with water. Aerokleen CD1 is also ideally suited for application through robotic equipment and is recommended by the manufacturer for use with the Nordic Dino system.

  • Fuselage and Undercarriage Cleaning – Heavy Contamination:

    Exhaust stains and other heavy contamination of the types usually associated with engine and undercarriage areas will be removed more readily with stronger concentrations of up to 50% Aerokleen CD1 in water. Where very heavy long standing soil is present, the use of either Aerokleen A320 or Aerokleen Aerosolv heavy duty cleaners are recommended.
    Should adverse weather conditions lead to the product drying on to the aircraft surface, this may be readily re-wet and removed by a further application of either Aerokleen CD1 or water.

  • Pre-paint Cleaning:

    As a final cleaning stage after paint removal and prior to commencing with a subsequent painting process, Aerokleen CD1 is effective at a concentration of 5% in water. After application and agitation, the surface should be thoroughly rinsed with water.


  • 25 litre drums, 200 litre drums, 1000 litre IBC’s and bulk road tankers.

Health and safety information

  • Always consult the product label and Dasic Safety Data Sheet before use.
Description Applications