Request a Quote

  • 500 characters remaining
  • I allow Aviation Spares & Repairs to contact me via email/phone to discuss this enquiry. If you would like to know more about the way we handle your data, please view our Privacy Policy

Aerokleen A710

Product Description

Aerokleen A710 is a new generation, high performance aircraft exterior cleaner.

  • Outperforms even highly alkaline products
  • Low alkalinity improves operator safety and comfort
  • Good rinsability
  • Exceptionally low streaking
  • Low odour
  • Comprehensive aircraft approvals to latest specifications
  • Effective technical cleaner as well as general exterior cleaner

Aerokleen A710 is a very high performance aircraft exterior cleaner, which is less strongly alkaline than many products on the market. It is safe on modern high solids paint schemes.

Aerokleen A710 has been developed to meet current and future environmental standards and to provide aircraft operators with more effective and safer aircraft exterior cleaners for the 21st century.

Please contact Aviation Spares & Repairs Limited for more information on the Aerokleen A710. We are here to help with all your GSE requirements.

  • Fuselage Cleaning – Medium Soiling:

    Painted and non-painted alloy surfaces may be effectively cleaned using Aerokleen A710 at a concentration of 10% in water. Aerokleen A710 may be applied by brush, spray or by foam applicator. Application should be commenced at the lowest position working in an upward direction in order to minimise any potential for streak formation. Adequate dwell time should be allowed to ensure complete wetting of the surface which should then be agitated with a brush and subsequently well rinsed with water.
    Aerokleen A710 is also ideally suited for application through robotic equipment such as the Nordic Dino system.

  • Fuselage and Undercarriage Cleaning – Heavy Soiling:

    Exhaust stains and other heavy contamination of the types usually associated with engine and undercarriage areas will be removed more readily with stronger concentrations of up to 40% Aerokleen A710 in water. Where very heavy long standing soil is present, the use of either Aerokleen A320 or Aerokleen A460 heavy duty cleaners is recommended.
    Should adverse weather conditions lead to the product drying on to the aircraft surface, this may be readily re-wetted and removed by a further application of either Aerokleen A710 or water.

  • Pre-paint Cleaning:

    As a final cleaning stage after paint removal and prior to commencing with a subsequent painting process, Aerokleen A710 is effective at a concentration of 10% in water. After application and agitation, the surface should be thoroughly rinsed with water.


  • 25 litre drums, 200 litre drums, 1000 litre IBC’s and bulk road tankers.

Health and safety information

  • Always consult the product label and Dasic Safety Data Sheet before use.
Description Applications